TM 5-3805-291-23-2
ENGINE REPLACEMENT - CONTINUED
0171 00
COMPONENT TRANSFER - CONTINUED
42.
Install adapter and valve assembly (152), connect hose
(154), and tighten hose clamp (153).
427-C1914
N OT E
There is an orientation mark on the hex head of the ether atomizer, which is aligned with the pinhole in the
atomizer. When installed correctly, this mark should face away from the engine. The atomizer is oriented in
this way to ensure thorough mixing of ether with the intake air. This is accomplished by spraying ether
against the direction of the incoming air.
43.
Install adapter (149), atomizer (150), and tube (151) as an assembly on engine (15).
44.
Install clip (148), spacer (147), washer (146), bolt (145), clip (144), washer (143), and bolt (142) on engine (15).
427-C1913
0171 00-24
