TM 5-3805-291-23-2
TRANSMISSION AND TORQUE CONVERTER REPLACEMENT - CONTINUED
0204 00
REMOVAL - CONTINUED
Transmission Assembly - Continued
0204 00
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Combined transmission assembly weighs 2,200 lb (998 kg).
11.
Remove bolt (24) and washers (25 and 26) from bracket assembly (27). Repeat for opposite side.
12.
Relieve tension of transmission mounts with lifting equipment.
13.
Remove five bolts (28) and washers (29) from lower torque converter assembly (16).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Engine weighs 3,200 lb (1,451 kg).
14.
Raise engine slightly and insert wood block between flywheel housing and axle as shown.
15.
Lower engine to rest on wood block.
427-C0986
427-C1937
0204 00-6
