• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
OPERATION IN SANDY OR DUSTY CONDITIONS
OPERATION IN SNOW AND ICE

Operators Manual For M400T And M400W
Page Navigation
  62    63    64    65    66  67  68    69    70    71    72  
img
.
TM 5-3805-292-10
0006
OPERATION AT HIGH ALTITUDES
0006
WARNING
DO NOT service cooling system unless engine has cooled. This is a pressurized cooling
system and escaping steam or hot coolant will cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool
down. Loosen cap to first stop and let any pressure out of cooling system, then remove
cap.
Wear effective eye, hand, and skin protection when handling coolants.
Failure to follow these warnings may result in injury to personnel.
NOTE
Engine operates at less than peak performance at high altitudes. Coolant level and engine
indicators must be watched closely.
Add coolant, if coolant level is low (WP 0020).
END OF TASK
OPERATION IN SNOW AND ICE
0006
General
WARNING
DO NOT smoke or permit any open flame in area of machine while you are servicing fuel
system. Be sure hose nozzle is grounded against filler tube during refueling to prevent
static electricity.
Operating personnel must wear fuel-resistant gloves when handling fuels. If exposed to
fuel, promptly wash exposed skin and change fuel-soaked clothing.
Always stop engine prior to refueling.
Failure to follow these warnings may result in injury to personnel or damage to equipment.
NOTE
Ensure portable fire extinguisher is within reach prior to refueling.
1. Fuel tank should be kept full. Keep snow and ice away from fuel filler.
2. Clean snow away from windshields and lights.
Driving
1. Accelerate slowly to avoid spinning tires or tracks.
2. Drive at slower speeds.
3. Give signals in plenty of time before turning. Apply brakes in plenty of time to give early warning of intention to
stop. This will also help to avoid skidding. Maintain double the normal distance from the machine ahead.
0006-16


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.