TM 5-3805-298-23-1
0078
Table 1. Clutch Engagement Is Slow - Continued.
078
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Clutch Engagement Is Slow
Test Step 5. Verify Malfunction Is
- Continued
Resolved.
1. Raise the work tool above the
ground (TM 5-3805-298-10).
2. Turn transmission neutralizer
switch to ON (TM 5-3805-298-10).
3. Warm the transmission oil to
normal operating temperature of
approximately 165F to 185F
(75C to 85C).
4. Warm the hydraulic oil to operating
temperature of 140F (60C)
(TM 5-3805-298-10).
5. Apply service brake and release
parking brake (TM 5-3805-298-
10).
6. Turn the transmission control to
first speed forward (TM 5-3805-
298-10).
7. Increase engine to high speed idle
Machine Shifts into First Gear
(2,450 rpm).
Correctly - Proceed to step 8.
Machine Does Not Shift into First
Gear Correctly - Repeat
troubleshooting from the beginning.
8. Turn the transmission control to
second speed forward (TM 5-
3805-298-10).
9. Increase engine to high speed idle
Machine Shifts into Second Gear
(2,450 rpm).
Correctly - Proceed to step 10.
Machine Does Not Shift into Second
Gear Correctly - Repeat
troubleshooting from the beginning.
10. Turn the transmission control to
third speed forward (TM 5-3805-
298-10).
11. Increase engine to high speed idle
Machine Shifts into Third Gear
(2,450 rpm).
Correctly - Troubleshooting complete.
Proceed to step 12.
Machine Does Not Shift into Third
Gear Correctly - Repeat
troubleshooting from the beginning.
12. Apply service brake (TM 5-3805-
298-10).
13. Reduce engine speed to low idle
(825 rpm).
14. Turn the transmission control to
Neutral (N) (TM 5-3805-298-10).
0078-7
