TM 5-3805-298-23-1
0100
Table 1. 672 Torque Converter Output Speed Sensor Diagnostic Codes - Continued.
0100
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2. Using digital multimeter
Continuity - Replace transmission
672-2 Torque Converter
(WP 0174), test for continuity
wiring harness (WP 0298).
Output Speed Sensor Data
between connector P-C1
Is Erratic, Intermittent, or
Proceed to Test Step 7.
(WP 0012, Figure 53) terminal 9
Incorrect - Continued
No Continuity - Replace transmission
and ground.
ECM (WP 0266).
Proceed to Test Step 7.
Test Step 7. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install transmission ECM cover
(WP 0266).
3. Install left and right lower cab
access panels (WP 0347).
4. Using MSD, check for active
Diagnostic Code 672-2 Torque
diagnostic codes (WP 0008).
Converter Output Speed Sensor
Data Is Erratic, Intermittent, or
Incorrect Becomes Inactive -
Troubleshooting complete.
Diagnostic Code 672-2 Torque
Converter Output Speed Sensor
Data Is Erratic, Intermittent, or
Incorrect Remains Active - Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0100-5/(6 blank)
