For ease in handling, use of output yoke is recommended when pressing bearing on shaft.
2. Position transfer drive shaft (Figure 10, Item 4) in an arbor press, input side up. Position bearing (Figure 10,
Item 3) on shaft. Install output yoke (Figure 10, Item 2).
3. Use a suitable sleeve (Figure 10, Item 1) to press bearing (Figure 10, Item 3) on shaft. Continue press
pressure until yoke (Figure 10, Item 2) bottoms on end of splines. Bearing is now correctly positioned on shaft.
Remove yoke from shaft.
Figure 10. Bearing Installation.