5-7. LIGHT SYSTEMS MAINTENANCE (CONT)
c. Rear Flood Lights (cont).
AND REPAIR (SHEET 2 OF 2)
Inspect remaining parts for cracks, breaks, distortion, or damaged
threads; replace as necessary.
Position bushing (10) and washer (9) on threaded stud of housing (8).
Position housing (8) by guiding terminal (5) end of wire through mounting
hole in radiator guard .
Slide lock washer (7) and lock nut (6) over terminal (5) end of wire, in-
stall on housing, and tighten using open end wrench.
Connect flood light terminal (5) to wiring harness blue wire terminal (4)
by grasping both in your fingers,
alining, and firmly pushing them to-
g e t h e r.
Connect terminals (3) to lamp (2) terminals by grasping in your fingers,
alining, then firmly pushing onto lamp terminals.
Position lamp (2) in housing (8) and push retainer (1) over lamp. Push
r e t a i n e r t a n g s
into housing cut outs using screwdriver as necessary .
g r i l l e .