FRONT TILT LEVER AND LINK REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Lever assembly weighs 130 lb (59 kg).
Use lifting equipment to support upper and lower ends
of lever assembly (16).
Remove bolt (20) and washer (21) from pin assembly
Remove pin assembly (22) from lever assembly (16).
With assistance, remove lever assembly (16) from link
Use tiedown strap to prevent tilt cylinder (24) from