LIFT ARMS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Disconnect grease line (37) from fitting (38). Remove
and discard O-ring (39) from grease line.
Disconnect hose assembly (40) from line (41).
Remove and discard O-ring (42) from hose assembly.
Repeat for opposite side of lift arm assembly (1).
Use lifting equipment to support lift arm assembly (1).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury or
death to personnel.
N OT E
Pin assembly weighs 82 lb (37 kg).