REAR AXLE TRUNNION REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove thrust washer (5), four bolts (6), washers (7),
plate (8), and thrust washer (9) from end of trunnion
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Rear support weighs 100 lb (45 kg).
Attach lifting equipment to rear support (4).
With assistance, remove rear support (4) from trun-