Table 1. Preventive Maintenance Checks and Services (PMCS)
for the M400T and M400W SSL - Continued.
d. Wipe dipstick clean, then
reinsert into dipstick tube until
fully seated. Remove dipstick
and take reading. Level must be
within cross-hatched area
(between add and full marks) at
end of dipstick.
Figure 21. Dipstick Markings.
e. If level is low, clean engine oil
filler cap with a rag, then turn
fully counterclockwise (left) to
remove. Add oil through filler
tube opening until level on
dipstick is correct. Refer to LO
5-3805-292-13 for correct grade
of oil for expected temperature
f. Install filler cap and turn fully
clockwise (right) until tight.
ENGINE OIL FILLER CAP
Figure 22. Engine Oil Filler Cap.