L05 3805 201 12 2
LUBRICATION
ORDER
12 FEBRUARY 1971 (Supersedes LO5-3805-201-15-2, dtd I Nov 1963)
LOADER, SCOOP TYPE: DIESEL ENGINE; 4 WHEEL DRIVE
REAR WHEEL STEERABLE PNEUMATIC TIRES; 2-1/2
CU. YD.; W/MULTI-SEGMENT BUCKET (FRANK
G. HOUGH MODEL H-9OCM) W/ENGINE
CUMMINS MODEL JT-6-B1
Reference: LO5 3805-201-12-1 C9100-lL
Intervals are based on normal hours of operations. Adjust to compensate for abnormal operations and severe conditions. During inactive periods,
sufficient lubrication must be performed for adequate preservation.
Clean fittings before lubricating,
Relubricate after washing or fording.
Clean parts with SOLVENT, dry-cleaning, or with OIL, Fuel; Diesel. Dry before lubricating.
Lubricate points indicated by dotted arrow shafts on both sides of equipment.
Drain gearcases when hot. Fill and check level.
Clam Hinge
Front Differential Fill
and Level
Front Axle Planetary
(Check level.) (See key.)
Fill and Drain
(Drain and refil.)
Front Axle Planetary Level
(See key.) (See note 3.)
(Check level.) (See note 3.)
Front Differential Drain
Transmission and Converter
(Drain and refill.)
Oil Filter
Lower Front Universal
Joints and Spline
Transmission and Converter
Level Gage
(Check level.) (See note 6.)
Transmission Drain
(Drain and refill.)
Torque Converter Drain
(Drain and refill.) (See note 6.)
Lower Rear Universal
Joints and Spline
Tranmsission and Converter
Fill and Breather
(See key.) (See note 6.)
Rear Axle Planetary Level
(Check level.) (See note 3.)
Upper Universal Joints
Rear Differential Drain
Rear Axle Planetary Fill and
(Drain and refill.)
Drain
(Drain and refill.)
Rear Differential Fill
(See key.) (See note 3.)
and Level
(Check level.) (See key.)
Oil Cooler Drain
