L05-3805-219-12-2
-KEY-
CAPACITY
EXPECTED TEMPERATURES
INTERVALS
Above +32F
+ 40F to -10 F
0F to -65F
OE-OIL, Engine, Heavy Duty
Oil Can Points
OE 30
OE 10
OES
OES-OIL, Engine, Sub-zero
GO-LUBRICATING OIL, Gear
Intervals given
Differentials
19 qts. ea.
are in hours of
Axle Planetaries
2 1/2 qts. ea.
GO 140
GO 90
normal
GOS
Steering Gear Housing
1/2 qt.
operation
GOS-LUBRICATING OIL, Gear, Sub-zero
HBA-FLUID, Hydraulic, Non-petroleum
Master Brake Cylinder
3/4 qt.
ALL TEMPERATURES
GAA-GREASE, Automotive and Artillery
NOTES:
1.
FOR OPERATION OF EQUIPMENT IN PROTRACTED COLD
Copy of this Lubrication Order will remain with the equipment at all times;
o
TEMPERATURES BELOW - 10 F. Remove lubricants prescribed in the key
instructions contained herein are mandatory.
o
for temperatures above - 10 F. Relubricate with lubricants specified in the
o
BY ORDER OF THE SECRETARY OF THE ARMY:
2. AXLE PLANETARY DRAIN. Every 1000 hours, rotate wheels until drain
plug is at bottom center, drain. To fill, rotate wheels until level plug is below
W. C. WESTMORELAND
center of axle, and drain plug is top center. Fill and check level.
General, United States Army,
3. OIL CAN POINTS. Every 10 hours lubricate all control linkage and
Chief of Staff.
exposed threads with OE.
4. U JOINT AND SPLINE. EVERY 500 hours, remove plug from spline,
OFFICIAL:
install fitting, lubricate sparingly, remove fitting and install plug.
KENNETH G. WICKHAM,
Major General, United States Army,
The Adjutant General
FOLD
FOLD
______________
_____________
LO 5-3805-219-12-2 DISTRIBUTION: To be distributed in accordance
with DA Form 12-25, Section II, (qty rqr block No. 402) organizational
maintenance requirements for Earth Moving Equipment, Loaders.
U.S. GOVERNMENT PRINTING OFFICE: 1984-420-903/33
884-460
