INTERVAL q LUBRICANT
LUBRI CANT q INTERVAL
Hydraulic
Brake Actuator Fill
OE/
and Level Plug (C)
HDO Reservoir Fill and
Level Cap (0)
(Check level)
CAUTION: Before
removing cap close
air valve on tank
Hydraulic
and slowly loosen
Reservoir
filler cap to
Filters (C)
relieve pressure in
(See Note 9)
reservoir. (Check
level) (See Key)
Hydraulic
GO
Front Planetary
Reservoir Drain
Hub Fill and
Plugs (o)
Drain (0)
(Drain and refill)
(See Key)
(See Note 11)
Transmission and
Torque Converter
Front Planetary
Oil Filter (0)
Level Plug (0)
(See Notes 1 and 8)
(Check level)
OE/ Accelerator Shaft
Starter
HDO Linkage (C)
Bearings (0)
(Sparingly)
(Remove plugs,
lubricate sparingly,
Loader Control
OE/
install plugs)
HDO Lever Pivots (C)
(Sparingly)
Rear Planetary Hub
OE/ Hand Brake Lever
Fill and Drain (0)
HDO ( C )
(See Key) (See
Transmission and
Note 11)
Converter Drain
Rear Planetary
Plug (0)
Level Plug (0)
(Drain and refill)
(Check level)
(See Notes 1 and 7)
Air Cleaner (C)
Engine Crankcase
(Dry type. No Iub
Oil Fill and
rication required)
Level (0)
(Check level) (See
Transmission and
Key) (See Note 4)
Torque Converter
CAUTION: When
Oil Strainer (0)
OEA oil is used the
(See Note 7)
level will be check-
Transmission and
OE/
ed more often.
Fill and Level
Engine Oil
Cap (0)
Filter (0)
(See Key) (Check
(See Notes 1 and 6)
level) (See Note 7)
Engine Accessory
Engine Crankcase
Drain Plugs (0)
(Sealed bearings,
(Drain and refill)
no lubrication
(See Notes 1 and 5)
required. )
TA219612
CARD 2 0F 7
LO 5-3805-250-12
