INTERVALS LUBRICANT
LUBRICANT-INTERVAL
Hydraulic Reservior
Brake Actuator Fill
Fill and Level
and Level Plug (C)
Cap (0)
(Check level)
CAUTION: Before
removing cap close
Hydraulic Reservoir
Filters (0)
air valve on tank
(Clean filters)
and slowly loosen
(See Note 9)
filler cap to relieve
Hydraulic Reservoir
pressure in reservoir
Drain Plugs (0)
(Check level)
(Drain and refill)
(See Key)
Front Planetary Hub
Transmission and
Torque Converter
Fill and Drain (0)
Oil Filter (0)
(See Key) (See
Starter Bearings (0)
Front Planetary
(Remove plugs,
Level Plug (0)
lubricate sparingly,
(Check level)
install plugs)
Accelerator Shaft
Engine Crankcase
Oil Fill and Level (C)
Linkage (C)
(Check level) (See
(Sparingly)
Loader Control
CAUTION: When
Lever Pivots (C)
OEA oil is used the
(Sparingly)
level will be
Transmission and
checked more often.
Converter Drain
Rear Planetary Hub
Plug (0)
Fill and Drain (0)
(Drain and refill)
(See Key) (See
Air Cleaner (C)
Rear Planetary
(Dry type. No
Level Plug (0)
lubrication
(Check level)
required)
Engine Oil
Transmission and
Filter (0)
Torque Converter
Oil Strainer (0)
(Clean strainer)
Engine Accessory
Alternator (0)
(Sealed bearings, no
Transmission and
lubrication required)
Torque Converter
Fill and Level
Engine Crankcase
Cap (0)
Drain Plugs (0)
(See Key) (Check
(Drain and refill)
level) (See Note 7)
TA 219619
CARD 2 OF
LO 5-3805-251-12
