NOTES - CONTINUED:
AOAP laboratory support is not available,
i n s t a l l new filter element each 1000
hours.
9. HYDRAULIC RESERVOIR FILTERS.
E a c h 1000 hours, remove covers and
filters, clean filters and housings. Install
f i l t e r s and covers. After replacement,
operate hydraulic system for 5 minutes,
check for leaks, check level and bring to
"FULL" mark.
1 0 . FRONT PLANETARY HUB/REAR
PLANETARY HUB. Check level each 250
hours. Change gear lubricant only when
required by maintenance repair action,
contamination by water, or other foreign
material. After refill, operate for 5
minutes, check for leaks and bring oil
level to level plug opening.
11. FRONT DIFFERENTIAL/REAR DIF-
FERENTIAL. Check level each 250 hours.
Change gear lubricant only when required
by maintenance repair action, contamina-
tion by water, or other foreign material.
After refill, operate for 5 minutes, check
for leaks and bring oil level to level plug
opening.
Copy of this Lubrication Order will remain
12. LUBRICANTS. The following is a list
with the equipment at all times, instruc-
of lubricants with military symbols and
tions contained herein are mandatory.
applicable specification numbers.
By order of the Secretary of the Army:
MIL-L-2104
OE/HDO
MIL-L-2105
GO
JOHN A. WICKHAM, JR.
MlL-G-10924
GAA
General, United States Army
MIL-L-46167
OEA
Chief of Staff
MIL-B-46176
BFS
P-D-680
(SD), Type II
OFFICIAL:
ROBERT M. JOYCE
Major General, United States Army
The Adjutant General
DISTRIBUTION:
To be distributed in accordance with
DA Form 12-25B, Operator and Organi-
zational Maintenance requirements for
Scoop Type Loader.
TA 219624
LO 5-3805-251-12
CARD 7 OF 7
