TM 5-2420-231-10
0010
BHL OPERATING PROCEDURES - Continued
3. Keep engine speed below 2,500 rpm.
4. Avoid operating on front, aft, or side slopes in excess of 15% on hard firm ground (Figure 2). On ground
which is not solid, maximum slopes are less than 15%.
Figure 2. Operating on a Hill.
Loading The BHL Onto Trailer
WARNING
The BHL can slip and fall from trailer or ramp. Make sure trailer and ramp are not slippery.
Remove all oil, grease, ice, etc. Carefully move the BHL onto trailer with the BHL centered
on trailer and ramp. Make sure the BHL is properly secured. Failure to comply may result in
serious injury or death to personnel.
NOTE
Refer to unit standing operating procedures (SOP) for detailed guidance.
1. Fasten seat belt.
2. Start engine.
3. Make sure backhoe is in transport position and that swing lock pin is installed (WP 0012).
