TM 5-2420-231-10
0012
BACKHOE OPERATING PROCEDURES - Continued
NOTE
Use flipover stabilizer pad rubber side down for solid surfaces; use metal side down for soft
surfaces.
12. If necessary, set flipover stabilizer pads as follows (Figure 1):
a. Remove retaining pin (Figure 1, Item 1) and pin (Figure 1, Item 2) on each stabilizer pad (Figure 1,
Item 3).
b. Flip stabilizer pads (Figure 1, Item 3) and install pins (Figure 1, Item 2) and retaining pins (Figure 1,
Item 1).
Figure 1. Flipover Stabilizer Pads.
