TM 5-2420-231-10
0015
DEGRADED OPERATION - Continued
CAUTION
Use twisting motion when installing NATO slave cable to receptacle. Do not forcefully push
cable onto receptacle. Failure to comply may result in damage to receptacle mount.
5. Connect NATO slave cable to slave receptacle of both vehicles.
6. Start slave vehicle engine.
7. Start disabled BHL engine (WP 0010).
CAUTION
Use twisting motion when disconnecting NATO slave cable from receptacle. Do not forcefully
pull cable from receptacle. Failure to comply may result in damage to receptacle mount.
8. After disabled BHL engine starts, disconnect NATO slave cable from both vehicles.
NOTE
Apply detergent to inside of NATO slave receptacle covers before installing to aid in future
maintenance.
9. Install NATO slave receptacle covers (Figure 4, Item 1) onto both vehicles.
Figure 4. NATO Slave Receptacle.
