TM 5-2420-231-23-1
0030
Table 1. Heating and A/C Troubleshooting Procedures - Continued.
030
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Heater Does Not Blow
Test Step 4. Inspect Heater
Warm Air When
Temperature Control and Heater
Temperature Control Is
Cable.
Set to Maximum Heat -
1. Turn ignition switch to the off posi-
Continued
tion (TM 5-2420-231-10).
2. Remove two screws (Figure 6, Item
1) from bezel (Figure 6, Item 2).
3.
Pull bezel (Figure 6, Item 2) away
from side console (Figure 6, Item 3).
Figure 6. Switch Control Panel.
0030
