TM 5-2420-231-23-1
0047
Table 1. Front Windshield Wiper Does Not Function Correctly.
0047
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Front Windshield Wiper
Test Step 1. Verify Operation of Front
Does Not Function Correctly Windshield Wiper.
1. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10) and dis-
connect batteries (WP 0157).
2. Remove wipers fuse (Figure 1,
Item 1) (TM 5-2420-231-10).
Figure 1. Fuse Panel.
0047
3. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less - Install
sure resistance between terminals
wipers fuse (TM 5-2420-231-10).
of wiper fuse. Resistance should
Proceed to step 5.
be 5.0 ohms or less.
Resistance Greater Than 5.0 Ohms -
Proceed to step 4.
4. Install new wipers fuse (TM 5-
2420-231-10).
5. Connect batteries (WP 0157) and
turn ignition switch to the on posi-
tion (TM 5-2420-231-10).
6. Place front windshield wiper switch
Front Windshield Wiper Operates at
(Figure 2, Item 2) in the low-speed
Low Speed - Proceed to step 7.
position (TM 5-2420-231-10) and
Front Windshield Wiper Does Not
observe front windshield wiper
Operate at Low Speed - Proceed to
(Figure 2, Item 1).
Test Step 2.
7. Place front windshield wiper switch
Front Windshield Wiper Operates at
(Figure 2, Item 2) in the high-
High Speed - Proceed to step 8.
speed position (TM 5-2420-231-
Front Windshield Wiper Does Not
10) and observe front windshield
Operate at High Speed - Proceed to
wiper (Figure 2, Item 1).
Test Step 11.