TM 5-2420-231-23-1
0047
Table 1. Front Windshield Wiper Does Not Function Correctly - Continued.
047
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 18. Test Front Windshield
Front Windshield Wiper
Wiper High-Speed Circuit for an
Does Not Function Correctly
Open in the Front Lights Wiring
- Continued
Harness.
With an assistant, use a digital
Resistance 5.0 Ohms or Less -
multimeter to measure resistance
Replace front windshield wiper motor
between front lights wiring harness
(WP 0342).
connector (WP 0007, Figure 64)
Connect all wiring harness connectors.
terminal J and front lights wiring
Install front floor cover plate (WP 0306).
harness connector (WP 0007, Figure
Install instrument panel front cover (WP
62) terminal A. Resistance should be
0174).
5.0 ohms or less.
Proceed to Test Step 26.
Resistance Greater Than 5.0 Ohms -
Replace front lights wiring harness (WP
0183).
Connect all wiring harness connectors.
Install instrument panel front cover (WP
0174).
Proceed to Test Step 26.
Test Step 19. Test for Faulty Wipers
Fuse.
1. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10) and dis-
connect batteries (WP 0157).
2. Remove wipers fuse (Figure 5,
Item 1) (TM 5-2420-231-10).
Figure 5. Fuse Panel.
0047
