TM 5-2420-231-23-1
0060
Table 1. Engine Does Not Turn Off With Ignition Switch in the Off Position
and Machine Does Not Move - Continued.
060
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 5. Verify That Symptom Is
Engine Does Not Turn Off
Resolved.
With Ignition Switch in the
Off Position and Machine
1. Ensure that all wiring harness con-
Does Not Move - Continued
nectors are connected.
2. Install instrument panel front cover
(WP 0174).
3. Install front floor cover plate (WP
0306).
4. Place powershift lever in the N
position (TM 5-2420-231-10).
5. Connect batteries (WP 0157) and
turn ignition switch to the on posi-
tion (TM 5-2420-231-10).
6. Start and idle machine (TM 5-
2420-231-10).
7. Place powershift lever in the F
position (TM 5-2420-231-10).
Transmission should shift into for-
ward and machine should move
forward.
8. Place powershift lever in the R
Transmission Does Not Shift into
position (TM 5-2420-231-10).
Forward - Diagnose transmission (WP
Transmission should shift into
reverse and machine should move
Transmission Does Not Shift into
backward.
Reverse - Diagnose transmission (WP
Transmission Shifts into Forward
and Reverse - Proceed to step 9.
9. Turn ignition switch to the off posi-
Engine Continues to Run With
tion (TM 5-2420-231-10).
Ignition Switch in the Off Position -
Repeat troubleshooting from the
beginning.
Engine Stops with Ignition Switch in
the Off Position - Troubleshooting
complete.
END OF WORK PACKAGE
0060-5/(6 blank)
