TM 5-2420-231-23-2
0103
REMOVAL CONTINUED
NOTE
Mark position of throttle cable bracket to aid in installation.
9. Remove two bolts (Figure 7, Item 2) and washers (Figure 7, Item 3), and position throttle cable bracket
(Figure 7, Item 4) aside.
10. Remove bolt (Figure 7, Item 5), washer (Figure 7, Item 6), strut (Figure 7, Item 1), and two washers (Figure 7,
Item 7) from machine.
Figure 7. Support Strut.
0103
END OF TASK
CLEANING AND INSPECTION
00103
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
00103
NOTE
Loosely install bolts to aid installation.
1. Install two washers (Figure 7, Item 7), strut (Figure 7, Item 1), washer (Figure 7, Item 6), and bolt (Figure 7,
Item 5) on machine.
NOTE
Position throttle cable bracket as marked during removal.
2. Position throttle cable bracket (Figure 7, Item 4) on machine and install two washers (Figure 7, Item 3) and
bolts (Figure 7, Item 2).
