TM 5-2420-231-23-2
0122
REMOVAL CONTINUED
2. Remove engine oil pressure sending unit (Figure 2, Item 2) and O-ring (Figure 2, Item 3) from engine (Figure 2,
Item 1). Discard O-ring.
Figure 2. Engine Oil Pressure Sending Unit.
0122
END OF TASK
CLEANING AND INSPECTION
0122
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0122
1. Install new O-ring (Figure 2, Item 3) and engine oil pressure sending unit (Figure 2, Item 2) on engine
(Figure 2, Item 1).