TM 5-2420-231-23-2
0148
CLEANING AND INSPECTION
0148
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0148
1. Install bracket (Figure 2, Item 2), two bolts (Figure 2, Item 3), and bolt (Figure 2, Item 1) on engine.
NOTE
Remove plugs and caps from hoses and fittings.
2. Install filter assembly housing (Figure 3, Item 4), two bolts (Figure 3, Item 7), and nuts (Figure 3, Item 6) on
bracket (Figure 3, Item 5).
3. Install two new O-rings (Figure 3, Item 2) and tubes (Figure 3, Item 1) on filter assembly housing
(Figure 3, Item 4).
4. Engage locks (Figure 3, Item 3) on tubes (Figure 3, Item 1).
Figure 3. Filter Assembly Tubes and Mounting.
0148
END OF TASK
FOLLOW-ON TASKS
0148
1. Install fuel filter and water separator element (WP 0147).
2. Lower hood (TM 5-2420-231-10).
END OF TASK
END OF WORK PACKAGE
0148-3/(4 blank)