2
TM 5-2420-231-23-2
FIELD MAINTENANCE
-
FWD/REV JUMPER HARNESS REPLACEMENT
0155
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tools and Special Tools
References - Continued
Tool Kit, General Mechanic's
WP 0370
0
0
(WP 0376, Item 117)
WP 0374 (Group Number 0303)
0
Materials/Parts
Equipment Conditions
Rag, Wiping (WP 0375, Item 25)
Batteries disconnected (WP 0157)
0
0
Tag, Marker (WP 0375, Item 33)
Front floor cover plate removed (WP 0306)
0
0
References
Estimated Time to Complete
WP 0369
3.0 hr
0
0
REMOVAL
0155
NOTE
Tag and mark wires to aid in installation.
Disconnect FWD/REV jumper harness (Figure 1, Item 2) from two main chassis wiring harness connectors
(Figure 1, Item 3) and FWD/REV solenoid connector (Figure 1, Item 1).
Figure 1. FWD/REV Jumper Harness Connectors.
0155
END OF TASK
CLEANING AND INSPECTION
0155
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
