TM 5-2420-231-23-2
0171
REMOVAL CONTINUED
14. Disconnect two chassis options wiring harness connectors (Figure 7, Item 1) from ride control solenoids
(Figure 7, Item 2).
NOTE
It may be necessary to remove and discard remaining tiedown straps prior to removing
chassis options wiring harness.
15. Remove chassis options wiring harness (Figure 7, Item 3) from machine.
Figure 7. Ride Control Solenoid Connections.
0171
END OF TASK
CLEANING AND INSPECTION
0171
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0171
NOTE
Install tiedown straps in locations and quantity as noted during removal.
Install wires as tagged and marked during removal.
Route wiring harness as noted during removal.
1. Route chassis options harness (Figure 7, Item 3) on machine.
2. Connect two chassis options wiring harness connectors (Figure 7, Item 1) to ride control solenoids
(Figure 7, Item 2).