TM 5-2420-231-23-2
0181
REMOVAL CONTINUED
NOTE
Note location and quantity of tiedown straps to aid in installation.
12. Remove tiedown straps (Figure 7, Item 3) from cab wiring harness (Figure 7, Item 1). Discard tiedown straps.
13. Disconnect two cab wiring harness connectors (Figure 7, Item 2) from wiper motor harness connectors
(Figure 7, Item 4).
14. Remove all tiedown straps from cab wiring harness.
15. Remove cab wiring harness (Figure 7, Item 1) from machine.
Figure 7. Cab Wiring Harness.
0181
END OF TASK
CLEANING AND INSPECTION
0181
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0181
1. Install cab wiring harness (Figure 7, Item 1) on machine.
2. Connect two cab wiring harness connectors (Figure 7, Item 2) to wiper motor harness connectors
(Figure 7, Item 4).
NOTE
Install tiedown straps as noted during removal.
3. Install new tiedown straps (Figure 7, Item 3) on cab wiring harness (Figure 7, Item 1).