TM 5-2420-231-23-3
0257
REMOVAL CONTINUED
5. Remove three nuts (Figure 3, Item 1), lockwashers (Figure 3, Item 2), brackets (Figure 3, Item 3), and two
tubes (Figure 3, Item 4) from machine. Discard lockwashers.
Figure 3. Clamps.
0257
END OF TASK
CLEANING AND INSPECTION
0257
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0257
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
NOTE
Remove plugs and caps from hoses and fittings.
Install lines as tagged and marked during removal.
1. Install two tubes (Figure 3, Item 4), three brackets (Figure 3, Item 3), new lockwashers (Figure 3, Item 2), and
nuts (Figure 3, Item 1) on machine.
