TM 5-2420-231-23-3
0261
CLEANING AND INSPECTION
0261
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
ASSEMBLY
0261
NOTE
Install fittings in position and orientation noted during disassembly.
1. Install new O-ring (Figure 10, Item 9) and straight fitting (Figure 10, Item 8) on loader valve (Figure 10, Item 1).
2. Install elbow fitting (Figure 10, Item 10) on straight fitting (Figure 10, Item 8).
3. Install new O-ring (Figure 10, Item 15) and fitting (Figure 10, Item 14) on loader valve (Figure 10,
Item 1), tighten nut (Figure 10, Item 13).
NOTE
Install fittings in same position as noted during removal.
4. Install five new O-rings (Figure 10, Item 16) and elbow fittings (Figure 10, Item 17) on loader valve (Figure 10,
Item 1), tighten nuts (Figure 10, Item 18).
5. Install elbow fitting (Figure 10, Item 7) on valve (Figure 10, Item 6).
6. Install two new O-rings (Figure 10, Item 3) and straight fittings (Figure 10, Item 2) on loader valve
(Figure 10, Item 1).
7. Install new O-ring (Figure 10, Item 5) and plug (Figure 10, Item 4) on loader valve (Figure 10, Item 1).
8. Install straight fitting (Figure 10, Item 12) on fitting (Figure 10, Item 14)
9. Connect tube (Figure 10, Item 11) on straight fitting (Figure 10, Item 12) and elbow fitting (Figure 10, Item 7).
END OF TASK
0261-9