TM 5-2420-231-23-3
0333
ADJUSTMENT CONTINUED
2. Striker plate adjustment:
a. Loosen two nuts (Figure 5, Item 7) and bolts (Figure 5, Item 8) on striker plate (Figure 5, Item 3).
b. Center striker plate (Figure 5, Item 3) so door latch bracket (Figure 5, Item 1) is evenly located between
rubber bumpers (Figure 5, Item 2) on striker plate.
c.
Tighten two bolts (Figure 5, Item 8) and locknuts (Figure 5, Item 7).
3. Striker adjustment:
a. Loosen nut (Figure 5, Item 5) and striker (Figure 5, Item 6).
b. Center striker (Figure 5, Item 6) to prevent interference from door latch bracket (Figure 5, Item 4).
c.
Striker (Figure 5, Item 6) must be adjusted far enough inboard to cause door seal to contact door frame.
d. Tighten nut (Figure 5, Item 5) and striker (Figure 5, Item 6).
Figure 5. Striker Location.
0333
END OF TASK
END OF WORK PACKAGE
0333-5/(6 blank)