TM 5-3805-255-14
0005
STOPPING THE ENGINE
0005
CAUTION
If the following step is neglected, serious engine damage may result.
1. Operate engine at half throttle (no load) for three to five minutes.
2. Pull out and hold engine shutdown control until engine stops. After engine stops, push handle in.
3. Turn ignition switch to OFF.
NOTE
When loader is shut down at the end of the day or if the loader is to be left unattended, the
electrical system master switch may be locked by removing the key.
4. Turn electrical system master switch to OFF (WP 0004).
Figure 10. Stopping the Engine.
0005
END OF TASK
0005-13