TM 5-3805-255-14
0011
Table 3. Transmission Troubleshooting Procedures for H100C Loader.
011
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
BE ALERT for personnel in the area while operating loader. Always check to ensure
area is clear of personnel and obstructions before moving. Failure to follow this
warning may result in injury or death to personnel or damage to equipment.
Check transmission oil level.
If transmission oil is low, fill to correct
1. Slow or Erratic
level (WP 0013). If problem still exists,
Transmission
notify Field Maintenance.
Engagement.
1. Ensure proper transmission range
Select proper transmission range (WP
2. Transmission Oil
is selected for loader operation.
0005). If proper range was used, go to
Temperature Gauge
step 2.
Indicates Overheating
and Action Light Comes
On (During Normal
Operation).
2. Reduce load and continue to
If problem still exists, go to step 3.
monitor transmission oil
temperature gauge (WP 0004).
3. Check transmission oil level.
If transmission oil is low, fill to correct
level (WP 0013). If problem still exists,
notify Field Maintenance.
Check transmission oil level.
If transmission oil is low, fill to correct
3. Transmission Does Not
level (WP 0013). If problem still exists,
Operate in Any Gear.
notify Field Maintenance.
1. Shift transmission to N
If problem still exists, go to step 2.
4. Transmission Does Not
(NEUTRAL) and back to
Shift From One Direction
appropriate direction.
to Another.
2. Check transmission oil level.
If transmission oil is low, fill to correct
level (WP 0013). If problem still exists,
notify Field Maintenance.
1. Ensure transmission direction
If problem still exists, go to step 2.
5. Transmission Does Not
lever is in desired position.
Shift From One Gear to
Another.
2. Check transmission oil level.
If transmission oil is low, fill to correct
level (WP 0013). If problem still exists,
notify Field Maintenance.
Restart engine (WP 0005).
If problem still exists, notify Field
6. Transmission Engages,
Maintenance.
But Loader Does Not
Move - Engine Stops
Running.