TM 5-3805-255-14
0088
FRONT MAIN OIL SEAL REPLACEMENT
00088
NOTE
Do not cut completely through sleeve.
1. Remove wear sleeve (Figure 3, Item 2) from vibration damper hub (Figure 3, Item 3).
2. Remove any nicks or scratches from wear sleeve surface of hub with an emery cloth.
3. Install a new wear sleeve (Figure 3, Item 2) as follows:
a. Apply a light coat of sealing compound, RTV-732 onto wear sleeve surface of damper hub (Figure 3,
Item 3).
b. Use driver PLT-542 (Figure 3, Item 1) to press new wear sleeve (Figure 3, Item 2) onto hub (Figure 3,
Item 3) until drive bottoms on hub face.
Figure 3. Vibration Damper Hub with a Wear Sleeve and Driver.
0088
0088-7
