TM 5-3805-255-14
0101
HOUSING ASSEMBLY
000101
1. Install bearing retainer plate (Figure 14, Item 3), four new bolt locks (Figure 14, Item 6), and bolts (Figure 14,
Item 7) on housing (Figure 14, Item 4). Torque bolts to 24 lb-ft (33 Nm).
2. Supporting shaft (Figure 14, Item 2) in a press, position gear (Figure 14, Item 1).
3. Install gear (Figure 14, Item 1) onto shaft (Figure 14, Item 2) until it bottoms on rear bearing (Figure 14, Item 5).
Figure 14. Pressing Gear on Shaft.
0101
0101-16