TM 5-3805-255-14
0113
DISASSEMBLY CONTINUED
000113
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment is in good condition and of
suitable load capacity. Keep clear of heavy parts supported by lifting equipment. Failure to
follow this warning may result in injury or death to personnel.
3. Use a suitable lifting device to remove ring gear and hub assembly (Figure 2, Item 1) from axle housing splines
(Figure 2, Item 2).
CAUTION
Do not damage bearing cage, bearing race, seal surfaces or splines. Failure to follow this
caution may result in damage to equipment.
4. Remove ring gear from hub assembly. Pry between wheel hub (Figure 2, Item 1) and ring gear assembly
(Figure 2, Item 3).
Figure 2. Ring Gear and Hub Removal.
0113
0113-3