TM 5-3805-255-14
0124
DISASSEMBLY
000124
1. Remove relief valve (Figure 1, Item 1) from reservoir cover (Figure 1, Item 11).
2. Remove nut plunger (Figure 1, Item 10), flat washer (Figure 1, Item 9), spring (Figure 1, Item 8), sleeve (Figure
1, Item 7), and flat washer (Figure 1, Item 6) from bottom of reservoir body (Figure 1, Item 5).
3. Remove drain valve (Figure 1, Item 4), elbow (Figure 1, Item 2), and plug (Figure 1, Item 3) from reservoir body
(Figure 1, Item 5).
4. Remove elbow (Figure 1, Item 2) and drain plug (Figure 1, Item 3) from drain valve (Figure 1, Item 4).
Figure 1. Hydraulic Reservoir/Tank Assembly.
0124
END OF TASK
CLEANING AND INSPECTION
000124
Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
END OF TASK
0124-2