Figure 17
Remove impeller hub gear and oil baffle from impeller.
Figure 20
Rotate pump gears to expose snap ring ends in pump
gear slot. Remove snap ring from snap ring groove.
From rear of converter housing, tap pump gear and
bearing from housing. Locating ring removed will re
main between pump gear and bearing.
Remove impeller hub bearing retainer ring. Turn im-
peller over, tap bearing from hub.
Figure 21
Remove stator support bolts.
Figure 19
Straighten corners of impeller hub bolt lock plates.
Figure 22
Remove impeller to impeller hub bolts. Remove im-
Remove stator support.
peller hub and "O" ring.
-4-