REFER TO SECTION AFTER FIGURE NO. 32 for
STRAIGHT THRU DRIVE DISASSEMBLY.
OFFSET DRIVE DISASSEMBLY
Figure 25
Lock output gears with a soft bar. Remove companion
flange nut, washer, "O" ring and flange from output
shaft.
Figure 23
Remove turbine shaft bearing cap bolts. Remove bear-
ing cap.
Figure 26
Remove output bearing cap stud nuts and washers.
Figure 24
Remove turbine tachometer drive adaptor bolts. Install
two bolts in threaded holes, turn evenly, remove adap-
Figure 27
tor.
Remove output bearing cap and oil seal.
-5-
