TM 5-3805-258-10
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Height, Dumping to Cutting Edge at Full Tilt - 114 inches
(2.9m)
Length, Overall (Maximum) - 296.6 inches (7.59m)
Length, Drive on Configuration (With Trailer) - 343.4 inches
(8.72m)
Length, Sectionalized Configuration (Power Section) - 157.9
inches (4.0lm)
Length, Sectionalized Configuration (Bucket Section) - 171.7
inches (4.36m)
Wheel Base - 125.2 inches (3.18m)
Width, Overall (Maximum) - 106 inches (2.68m)
Center of Gravity, Non-Sectionalized (From Rear Bumper
Forward - 144.1 inches (3.66m)
Center of Gravity, Sectionalized (Power Section, (From Rear
Bumper Forward) 77.9 inches (1.98m)
Center of Gravity, Sectionalized (Bucket Section, From
Front Bucket Back) 87.7 inches (2.23)
Reach, Measured to Cutting Edge, Full Tilt and 45’ Dump
Angle (minimum) - 41 inches (104m)
Roll Back at Carry Height (Maximum) - 48 inches (1.22m)
Digging Depth (Maximum) -3.5 inches (75mm)
Hydraulic cycle time, rated load in bucket:
Raise - 6.6 seconds
Dump - 2.2 seconds
Lower (empty) - 3.0 seconds
Total - 11.8 seconds
Turning radius (minimum) -250.3 inches (2.67m)
Clearance circle (bucket in carry position) - 540 inches
(13.74m)
H.
The loader is equipped with:
Bucket:
Multi-purpose bucket with an SAE nominal heaped rating
of 2.5 cu yds (2.4m) and straight cutting edge.
Measured width
of bucket is 106 inches (2.68m).
102
