TM 5-3805-258-24-2
POWER TRAIN
DISASSEMBLY AND ASSEMBLY
TRANSMISSION
48. Remove rings (57) and (58) from the piston.
49. Remove springs (59) from the rods.
50. Remove three discs (61) and two plates (62).
51. Remove carrier (60) and No. 2 clutch housing.
52. Use 3.175 mm (.125 in.) diameter rods (63)
with a point ground on one end to put the ring
under compression that holds carrier (60) and
gear (64) together.
53. Remove carrier (60) from gear (64).
54. Remove ring (65) from the carrier.
55. Use a hammer and a punch to push the pins
through carrier (60) into shafts (66). Remove
the shafts.
5-269
