TM 5-3805-258-24-2
POWER TRAIN
67.
68.
69.
70.
71.
72.
73.
DISASSEMBLY AND ASSEMBLY
TRANSMISSION
Remove springs (85) and rods (83).
Remove four discs (84) and three plates (86)
(forward).
Use tool (B) to remove ring (88) from the shaft.
Remove carrier (89) and the gear (87) as a
unit.
Place a small block under carrier (89).
Put 2.36 mm (.093 in.) diameter rods (90) with
a point ground on one end around carrier (89)
and gear (91) as shown. This will compress
retaining ring and let gear (91) be lowered
from carrier (89).
Remove retaining ring (92) from the carrier.
74. Use a hammer and punch to push the pins
through carrier (89) into shafts (93).
5-272
