TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
SELECTOR AND PRESSURE CONTROL VALVE
REMOVE AND INSTALL SELECTOR AND
PRESSURE CONTROL VALVE
5072-10
WARNING
To prevent personal injury release the pres-
sure from the hydraulic system before any lines
are removed or disconnected.
1. Put marks on all lines for assembly purposes.
2. Disconnect hose assemblies (2), (3) and (4) and
tube assembly (1) from the control valve.
3. Remove bolts (6) and selector and pressure
control valve (5) from the machine.
4. Put the control valve in position on the machine
and install bolts (6).
5. Connect hose assemblies (2), (3) and (4) and
tube assembly (1) on the control valve.
DISASSEMBLE SELECTOR AND PRESSURE
CONTROL VALVE
5072-15
start by:
a) remove selector and pressure control valve
1. Remove fittings (1) and (2) from the selector
and pressure control valve.
5-348
