VEHICLE SYSTEMSTM 5-3805-258-24-2DISASSEMBLY AND ASSEMBLYLOADER MAIN FRAMESModels 950 BNS and 950BSSEPARATION OF LOADERMAIN FRAMES7051-29Tools NeededA B C D E F G5P3100Pump Group(or electric)2118S7610Base Assembly28S7615Pin228S7650Cylinder28S7640Stand28S7611Tube26V2157Link Bracket22B9886Hydraulic Jack18B7554Bearing Cup PullerAttachment15P4808Cap15P4007Cap21P2328Screw1Bar Stock 38 x 50 x200 mm (1 ½ x 2 x8 in.)11P1842Plate18M4839Adapter11P5558Stud, 1 ¼ in.116V3175Hydraulic Puller11P544Nut114K684Washer115P7288Adapter11P1838Plate16V3170Hydraulic Puller1start by:a) connection of anti-pivot linkb) remove cab and platformc) remove center drive shaftWARNINGTo prevent personal injury release the pres-sure from the hydraulic system before any linesare removed or disconnected.1.2.3.Disconnect lines (1) and (2) onRemove screws (4) and platetransmission neutralizer valve.the machine.(3) from theDisconnect cable assembly (6) from the camand the neutralizer housing. See REMOVETRANSMISSION NEUTRALIZER VAL-VE.4. Remove the bolts and disconnect transmissionselector (5) from the notch (slot ) on the valvespool.5. Remove the bolt and disconnect clip (7) fromthe front frame.5-461
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business