TM 5-3805-258-24-2
VEHICLE SYSTEMS
PARKING
12. Put brake drum (16) in position and install
bolts (17).
13. Put guard (18) in position around the drum.
Install the bolts that hold it in place.
14. Put drive shaft (19) in position and install the
clamps and the bolts. Tighten bolts to 55 ± 15
N-m (41 ± 11 lb.ft).
15. Put pin (20) and the cotter pin in position in the
link and yoke.
16. Make an adjustment to the parking brake. See
TESTING AND ADJUSTING.
end by:
a) anti-pivot link separation
5-458
DISASSEMBLY AND ASSEMBLY
BRAKE
