ENGINE
FAN DRIVE
7. Install spacer (8) on the shaft assembly.
8. Fill the hub with 5P960 Multipurpose Type
Grease.
9. Put bearing (9) in position in the hub. Make
sure the bearing makes a seat in the counter-
bore of the hub.
10. Put washer (10) in position on the bearing.
11. Install lock (13) and bolts (12). Bend the tabs
on the lock around the bolts.
12. Install O-ring seal (11) on the hub.
end by:
a) install fan drive
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
5-27
