TM 5-3805-258-24-2
ENGINE
DISASSEMBLY AND ASSEMBLY
WATER PUMP
4. Tighten vee belts (3) to the correct tension. See
INSTALL FAN DRIVE.
5. Make sure all gasket surfaces are clean and free
of dirt.
6. Install the gaskets and elbow (6) on the water
pump.
7. Tighten the clamp that holds hose (5) to the
elbow.
8. Connect wires (4) to the sending unit.
9. Connect hose (7) to the water pump.
10. Connect hose (8) to the elbow and tighten the
clamp.
11. Fill the cooling system with coolant to the cor-
rect level.
5-30
