TM 5-3805-262-20
7-1. PARKING BRAKE MAINTENANCE (CONT)
b. Parking Brake C h a m b e r.
This task covers removal, cleaning, inspection, and
installation of parking brake chamber.
TOOLS: No. 1 Common Organizational Maintenance Tool Kit
Socket wrench set, 3/8 inch drive
Fixed open end wrench set
Diagonal cutting pliers
Chocks, two
MATERIALS/PARTS: Clean cloths (Appendix C, item 1)
Cleaning solvent P-D-680 (Appendix C, item 2)
Detergent (Appendix C, item 3)
Cotter pin (FSCM 10988 PN 132-47)
NOTE
PRELIMINARY PROCEDURE: Loader turned completely right, wheels blocked,
and parking brake released.
REMOVAL (SHEET 1 OF 2)
NOTE
When performing following steps,
plug and cap hoses and fittings
when disconnected or removed to
p r e v e n t d i r t o r o t h e r c o n t a m i-
nants from entering air system.
(1)
(2)
(3)
(4)
(5)
(6)
Remove and discard cotter pin (1).
Remove clevis pin (2) and two
washers (3).
Remove and discard cotter pin (4).
Remove clevis pin (5).
Remove two links (6).
Apply parking brake to release air
pressure from parking brake chamber.
7-8
