REMOVAL - TM-5-3805-262-20

CLEANING AND INSPECTION (SHEET 1 OF 2) - TM-5-3805-262-20_899

TM-5-3805-262-20 Loader Scoop Type DED 4x4 Articulated Frame Steer 2-1/2 Cubic Yard (J.I. Case Model MW24C) Manual
Page Navigation
879

TM 5-3805-262-20 9-2. ENGINE HOODS AND PANELS MAINTENANCE (CONT) b. Engine Side Panels. This task covers removal, disassembly, cleaning, inspec- t i o n, and installation of engine side panels. TOOLS: No. 1 Common Organizational Maintenance Tool Kit Socket wrench set, 3/8 inch drive 5/16-18 tap Scratch wire brush Paint brush MATERIALS/PARTS: Clean cloths (Appendix C, item 1) Cleaning solvent P-D-680 (Appendix C, item 2) Crocus cloth (Appendix C, item 4) Paint (Appendix C, item 14) REMOVAL (1) (2) (3) (4) Unlock and remove lock (1). Pull up on latch handle (2) until latch (3) is disengaged from catch (4). Repeat for remaining latch. Grasp handle (5) and pull bottom of side panel (7) outward. Lift side panel (7) up and over two s l e e v e s ( 6 ) . Repeat steps (1) through (3) above to remove remaining engine side panels as necessary. DISASSEMBLY (1) Remove two screws (l), lock washers (2), and washers (3) then remove han- d l e ( 4 ) . (2) Remove two nuts (5), lock washers (6), and screws (7) then remove catch (8) from side panel (9). Repeat for remaining catch (8). (3) Repeat steps (1) and (2) above for remaining side panel (10). NOTE Perform following steps only if latches (14) are damaged and require re- placement. (4) Remove two nuts (11), lock washers (12), and capscrews (13). Remove latch ( 1 4 ) . (5) Repeat step (4) above for remaining seven latches as necessary. 9-14

Privacy Statement
Press Release
Contact